Contractor Services, Home Improvement

The Basics of Kitchen Remodeling

Kitchen Remodeling Richmond VA is a major undertaking. The project typically involves replacing (not just repainting or refinishing) all the major surfaces in the room, adding new countertops and flooring, and upgrading appliances with energy-efficient models.

It may also involve demolishing and removing load-bearing walls or moving plumbing and electrical wires to accommodate the changes. It’s important to know what to expect.

The 7 2019 Kitchen Renovations Trends You Don't Want to Miss

Kitchen remodeling begins with demolition, which removes the existing cabinetry and fixtures to make way for the new design. A contractor or DIYer can do this step, and careful planning is the key to success. Proper demolition makes for a safer job site and lays the foundation for an easier installation, saving time and money in the long run.

If your remodel involves the removal of an existing appliance, you’ll want to find a local charity that accepts used appliances for repurposing or donation. You can also donate old furniture, such as a dining table, to a local thrift store or consignment shop. To prepare for demolition, seal off the area to protect other areas of your home from dust and debris, and turn off the electricity at the breaker box, water valve under the sink, and gas behind the stove. Protect any flooring or surfaces you intend to keep by covering them with plastic sheeting. If you’ll be doing all or part of the demo yourself, you may want to rent a dolly to make it easier to move heavy appliances and cabinets. You should also designate a safe place to put items you want to save, such as decorations or the kitchen table.

For larger projects, you may need to hire a professional demolition company or general contractor. They will have the right tools and experience to do the work quickly and safely. They will also be familiar with local regulations, including any requirements for permits.

You can save some demolition costs by doing the work yourself, but it’s important to understand that this will increase the total project cost and timeline. Hiring a professional allows you to relax and focus on the other aspects of your renovation.

For smaller jobs, you can usually get away with simple, DIY kitchen demolition, such as removing a few doors and replacing them with new ones. For bigger changes, such as removing a load-bearing wall to open up an area, you’ll need a professional with the right equipment and knowledge of structural integrity to ensure your home stays safe and sound.

The design aspect of kitchen remodeling involves the creative process of combining elements like cabinets, countertops and appliances into a functional and aesthetic layout. An interior designer can help you turn your vision into a kitchen that will serve its intended purpose and also add to the overall value of your home.

Before you begin your remodel, determine how much you can afford to spend on the project. If possible, try to limit your expenses to items that will increase the value of your home. It is also a good idea to avoid doing anything that will require major electrical or plumbing work, since this can push your project into the big leagues in terms of cost.

Many projects fall into the category of either a complete gut and replace or a partial remodel. A complete remodel is a full makeover that includes replacing all cabinetry, countertops, appliances and flooring. A partial remodel is less expensive and still provides a substantial improvement.

If you decide to go with a partial remodel, consider doing things such as painting your cabinets or refacing them instead of completely replacing them. You may also be able to save money by keeping the same layout and not moving the existing sink, dishwasher or refrigerator. In addition, keeping existing piping and plumbing will reduce the overall cost of the project.

Adding new lighting is a great way to refresh the look of your kitchen and can make a significant difference in both appearance and mood. Installing dimmers will allow you to control the amount of light that you want to give the space. It’s also important to remember that the type of lighting you choose can change the color of your room. For example, soft white lights will have a warm glow while daylight bulbs have a cool tone.

Some remodeling contractors offer design services along with their construction expertise, which can be helpful to homeowners who are working with a limited budget. This option is particularly beneficial if you are planning to install a custom-designed island or other structural changes. If you’re looking for a contractor with design services, ask your personal network or join NKBA or NARI to find members in your area.

The materials that are used in a kitchen remodel are what defines the aesthetic and functionality of the space. They are responsible for up to 80% of the total cost of the project, so it is important that you choose your materials wisely. You need to consider beauty, practicality and durability. New innovations in materials have made it possible to get all three without compromising on price.

Cabinets are one of the largest expenses in a kitchen remodel. There are several options available to you, including refacing and replacing cabinets. Both have their benefits, but if you are going to spend the money on a remodel, it’s best to go for a premium material like solid hardwoods, which will last for years and can be repainted or refinished at any time. For a budget-friendly option, laminates and thermofoil are durable, attractive and easy to maintain.

Countertops are a focal point in any kitchen. They inspire culinary creativity, but they also need to be able to withstand the test of time and daily use. There are many different materials to choose from, including granite, quartz and soapstone. Choosing the right countertop is important, but it is even more vital to think about how you’re going to use your kitchen. A countertop that is resistant to water and chemicals will be more suitable for a busy family kitchen than a natural stone that can easily scratch or dent.

Flooring in the kitchen is another essential area to consider carefully. There are a variety of materials to choose from, but ceramic and porcelain tiles are a good choice for durability. They are also resistant to water and stains, so they will keep their appearance longer than other types of floors.

Windows are also an important component of a kitchen, and there are many different choices for window frames. Aluminum frame windows are popular for their sleek look, and they don’t rust or warp. Vinyl windows are also a popular choice, and they come in a wide range of standard designs to suit any taste.

It is also important to consider the regulations of your condo or co-op/HOA regarding kitchen remodeling. You will likely need to obtain a permit, and you may be limited in what can be done. You should also consult your building’s alteration agreement for guidance.

Once the initial steps of demolition and design are completed, it’s time to start building. A general contractor, interior designer or architect will guide you through the remodeling process. This individual can help you get better rates on materials and supplies, as well as provide expert advice on which kitchen design ideas are viable and within your budget.

If you are planning a complete remodel, your renovation team will start by framing and installing any new walls or partitions as needed for the kitchen’s new layout. The GC will also run new electrical wiring for any appliances and fixtures that require a different circuit. This is also the time to install new sheet metal ductwork, which is often done by an HVAC professional who understands the physics of airflow and can position the ducts for optimal performance.

Kitchen renovations can include a wide range of upgrades, from simple changes to more major improvements. Some renovations are more cosmetic than others, focusing on repainting or replacing hardware and appliances. Some are more extensive, requiring a total redesign of the kitchen’s structure and layout.

A basic kitchen renovation is a cost-effective makeover that limits structural changes and generally doesn’t change the layout of the room. A more significant overhaul may involve expanding the kitchen into an adjacent room, adding an addition to your home or building a new space entirely.

The drywall installers will hang and tape any necessary drywall as part of the renovation project, and then finish the walls according to your chosen design. Once this is completed, it’s time to install any new doors or windows. If you are using new doors and windows, it’s also important to seal them properly to prevent drafts and help save on energy costs.

This is also a good time to switch to energy-efficient upgrades, such as LED lights and water-saving faucets that reduce your utility bills. You can also upgrade your stove to an efficient gas or electric model, which will also decrease your utility bills.

By the end of the installation phase, your kitchen will be taking shape and looking a lot like your dream kitchen. If you’re working with a general contractor, they should have a checklist or timeline that will let you know when each phase of the renovation is complete. If you’re doing the work yourself, it’s helpful to set up a weekly schedule and stick to it so that your project doesn’t drag on too long.

Foundation Repair
Contractor Services

Types of Piers Used for Foundation Repair

Licensed structural engineers are the best source for a home foundation inspection. They will prepare an unbiased report on the state of your home’s foundation and offer suggestions for the repair method that is best for your situation.Foundation Repair

Regarding foundation repair, there are many factors to consider, including cost. Some homeowners prioritize getting the most bang for their buck, while others want to make sure they are getting top-quality work. Contact Sugar Land Foundation Repair for professional help.

Concrete piers are solid, steel-reinforced cylinders used to support foundations in weak soil conditions. They are also known as “slab piers.” These piers can be placed at regular intervals under the entire footprint of your house to strengthen the entire structure, reducing future damage and decreasing the likelihood of costly repairs. Concrete piers are more durable than steel piers, and they can be installed in any depth under your home.

Like all types of piers, they need to be properly drilled and placed into stable soil to ensure long-term stability. When selecting a contractor for this type of work, be sure to hire a licensed and experienced professional. Too many unscrupulous contractors cut corners to save money and install piers that are less than ideal for your house’s needs.

A reputable contractor will take a detailed look at your property before making any recommendations about which piers to use. The type of piers selected will depend on the soil conditions where your house is located, as well as the size, weight, and purpose of your house. It’s also important to consider future maintenance costs.

While all piers can provide long-term stability to your foundation, concrete piers are more durable than other pier types and can resist more compression, bending, and torque. They are also less susceptible to erosion, since they are constructed of one solid piece of concrete and are steel-reinforced on the inside. Additionally, concrete piers are easy for a reputable foundation repair contractor to install and require minimal landscaping removal.

Another advantage of concrete piers is that they are more economical than masonry or steel piers. Concrete is readily available, relatively inexpensive to manufacture, and a good insulator against moisture. Additionally, it is a sturdy material and can withstand heavy loads without failing.

Regardless of which type of piers you choose, it’s essential to address your foundation problems immediately before they worsen. Contact a reputable foundation repair contractor today to discuss your options and set up an inspection. Once the piers have been installed, hydraulic jacks will be used to lift your foundation back to its original position, and concrete or steel spacers will close the gap between the top of the piers and your foundation.

Steel Piers

While concrete piers are the most common support method for homes in our area, some contractors also use steel piers. This is a great option for foundation repairs in areas with clay soils or if your home’s current foundation was not built well. This type of pier system consists of end-bearing steel piers that are field load tested to ensure they will support your foundation. This pier system is also the most commonly used pier method for lifting and leveling concrete slabs on grade beams. The most popular model is the ECP 350 Steel Push Pier, and it has been the industry standard for many years.

Unlike concrete piers, steel piers are driven deeper into the ground. This is important because it allows them to reach a heavier, more stable load bearing stratum below the foundation. When this depth is reached, hydraulic jacks can then lift your foundation to the desired height.

Steel piers are more durable than concrete and often last longer, so they are a better choice for structures that will be exposed to the elements. They are also less prone to damage from movement in the soil, because they are installed so far down.

Another advantage of steel piers is that they can be installed without the need for concrete, which can save both time and money. This can be an important factor in certain projects, such as the repair of a historic or pre-fabricated building. In addition, they can be used in a wide range of applications, including underpinning, to raise the level of a basement or other structure.

A downside of steel piers is that they do not offer the same aesthetic options as concrete piers. This can be a concern for homeowners who value aesthetics and prefer a cleaner, more modern look to their home. However, a reputable contractor should be able to find ways to address these concerns and work with you to choose the best foundation repair option for your home. They can even combine this method with other types of support systems, like bracketed and helical piers, to create the ideal solution for your home’s specific needs.

Steel Push-Piers

Steel push piers, sometimes called micro piles or resistance piers, are used when the structural stability of a foundation is being compromised. As the name implies, this method of repairing foundation damage involves pushing the piers into the ground under your home or building using the weight of the structure itself. Foundation experts use push piers to stabilize heavy buildings such as two-story homes, large brick structures, or commercial buildings.

The advantage of using push piers is that it doesn’t require the same level of excavation as helical piers, meaning less work is needed at the foundation site. This is ideal for homeowners that are worried about the visual impact of a repair job. Additionally, a push pier system can be installed in tight spaces since the equipment is handheld and each pier is fitted together as it is pushed into the soil. For this reason, the minimum required space at each pier placement can be as small as 3’x3’ with a 6’ overhead clearance.

Once the piers have been placed and the load of the foundation is transferred to them, they are load tested to verify that they have reached their maximum capacity. Once the test is completed, the piers are removed and the soil that was excavated at each pier location is backfilled. This leaves a clean, minimally-invasive repair site that can immediately be restored to its original condition.

Like concrete piers, push piers can be installed in both new construction and existing foundations. When properly installed by a foundation repair expert, these piers are long-lasting and a cost-effective solution to fixing foundation settlement issues.

While this is an excellent option for repairing most foundation problems, it is important to consult with your local Foundation Repair expert to understand which type of piering is best suited for your specific circumstances. There are many factors that contribute to foundation movement, and it is important to know the cause of your particular problem in order to identify the best fix. A good repair specialist will be able to advise you on the most effective solutions for your situation and will provide you with all the options available to you, including both concrete and steel push piers.

Helical Piers

Helical piers, also known as helical pile systems, are an effective and efficient way to repair and stabilize failing foundations and new construction projects in soils that can’t support traditional foundation footings. They are hydraulically driven and screwed into competent load-bearing soils to provide a stable foundation. Grip Tite’s helical pier systems consist of true helix-shaped flight(s) welded to a central shaft that offers specified design capacities in both tension and compression applications.

Helical piling has a long history of use in the construction industry and is widely recommended by reputable engineers for both commercial and residential projects in unstable soil conditions. Reputable installers have specialized hydraulic equipment that minimizes the need for excavation, and allows helical piers to be installed quickly in less time than other methods.

They are inserted into the soil through a drilled hole and driven down into bedrock or a stronger soil stratum. When they reach the desired depth, a grout mixture is injected to further stabilize them and fill any voids around the hole. Once the helical piers are installed, they are attached to brackets under the foundation. Then, the house is raised back into place on top of the piers using hydraulic jack pumps until it reaches its original position.

Because helical piers don’t require concrete, they are a more environmentally friendly solution to underpinning a foundation. They can also be installed faster than other types of foundation piers, as they don’t require the wait for the concrete to cure. This makes them a more cost-effective choice for homeowners who want to save time and money on their foundation repair project.

Helical piers are more versatile than other types of foundation piers and can be used to support both old and new construction projects. They can even be relocated if your family grows or you decide to add on to your home in the future. Helical piers can be inserted into a wide variety of soil types, including sandy soils that shift little with seasonal moisture changes, loamy soils that tend to expand and contract more, and clayey soils that often swell and shrink.